Help - Search - Members - Calendar
Full Version: Spca5xx | Webcam Problem
Darkside_RG > Technical Discussions > Technical Help and Discussions > Linux Help
Saj5786
Feb 3 2009, 06:14 PM
Hi there...
here i am again asking for a little help xD
im trying to make a stream with a webcam by a php webpage but i cannot make the webcam work xD (the basic thing is missing for this)
im using Debian, uname -r: 2.6.18-6-686
i install webcam webcam-server xawtv
i also downloaded the spca5xx but cannot install it
when i do "make" shows up:

CODE
   Building SPCA5XX driver for 2.5/2.6 kernel.
   Remember: you must have read/write access to your kernel source tree.
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/user/spca5xx-v4l1goodbye CC=cc modules
make[1]: Entrando no diretório `/usr/src/linux-headers-2.6.18-6-686'
  CC [M]  /home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.o
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca5xx_open’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:2394: warning: implicit declaration of function ‘video_devdata’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:2394: warning: initialization makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:2399: warning: implicit declaration of function ‘video_get_drvdata’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:2399: warning: initialization makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca5xx_close’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:2489: warning: initialization makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca5xx_do_ioctl’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:2549: warning: initialization makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca5xx_ioctl’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3093: warning: implicit declaration of function ‘video_usercopy’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca5xx_read’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3112: warning: initialization makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca5xx_mmap’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3211: warning: initialization makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: At top level:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3263: error: variable ‘spca50x_template’ has initializer but incomplete type
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3264: error: unknown field ‘owner’ specified in initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3264: warning: excess elements in struct initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3264: warning: (near initialization for ‘spca50x_template’)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3265: error: unknown field ‘name’ specified in initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3265: warning: excess elements in struct initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3265: warning: (near initialization for ‘spca50x_template’)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3266: error: unknown field ‘type’ specified in initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3266: warning: excess elements in struct initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3266: warning: (near initialization for ‘spca50x_template’)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3267: error: unknown field ‘hardware’ specified in initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3267: warning: excess elements in struct initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3267: warning: (near initialization for ‘spca50x_template’)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3268: error: unknown field ‘fops’ specified in initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3268: warning: excess elements in struct initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3268: warning: (near initialization for ‘spca50x_template’)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3270: error: unknown field ‘release’ specified in initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3270: error: ‘video_device_release’ undeclared here (not in a function)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3270: warning: excess elements in struct initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3270: warning: (near initialization for ‘spca50x_template’)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3272: error: unknown field ‘minor’ specified in initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3272: warning: excess elements in struct initializer
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3272: warning: (near initialization for ‘spca50x_template’)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘cd_to_spca50x’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3340: warning: implicit declaration of function ‘to_video_device’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3340: warning: initialization makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3341: warning: return makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca50x_create_sysfs’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:3450: warning: implicit declaration of function ‘video_device_create_file’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c: In function ‘spca5xx_probe’:
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5509: warning: implicit declaration of function ‘video_device_alloc’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5509: warning: assignment makes pointer from integer without a cast
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5512: error: invalid application of ‘sizeof’ to incomplete type ‘struct video_device’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5512: error: invalid application of ‘sizeof’ to incomplete type ‘struct video_device’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5512: error: invalid application of ‘sizeof’ to incomplete type ‘struct video_device’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5514: error: dereferencing pointer to incomplete type
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5516: warning: implicit declaration of function ‘video_set_drvdata’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5521: warning: implicit declaration of function ‘video_register_device’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5521: error: ‘VFL_TYPE_GRABBER’ undeclared (first use in this function)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5521: error: (Each undeclared identifier is reported only once
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5521: error: for each function it appears in.)
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5550: error: dereferencing pointer to incomplete type
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5551: warning: implicit declaration of function ‘video_device_release’
/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.c:5553: warning: implicit declaration of function ‘video_unregister_device’
make[2]: ** [/home/user/spca5xx-v4l1goodbye/drivers/usb/spca5xx.o] Erro 1
make[1]: ** [_module_/home/user/spca5xx-v4l1goodbye] Erro 2
make[1]: Saindo do diretório `/usr/src/linux-headers-2.6.18-6-686'
make: ** [default] Erro 2


i read somewhere that i needed also linux-restricted-modules-`uname -r` but apt-get doesnt find it

and my "lsusb":

CODE
Bus 005 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 002: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam
Bus 002 Device 001: ID 0000:0000


can anyone help me out? ive googled but now i would like someone to point me in the right direction cause i think im doing the wrong googling xD or maybe just need more google hours... plz point me on the right direction xD


Many Thanks in Advanced!


P.S.:
i already have my webcam.conf if anyone wants

/etc/webcam.conf
CODE
[ftp]
host = localhost
user = nobody
pass = xxxxx
dir = /var/www
file = webcam.jpg
tmp = imageup.jpg
local = 1

[grab]
device = /dev/video0
width = 320
height = 240
delay = 0
input = camera
norm = ntsc
quality = 75
trigger = 180


and also my html code to put in a webpage

/var/www/webcam.html
CODE
<html>
<head>
<META HTTP-EQUIV="pragma" CONTENT="no-cache">
<META HTTP-EQUIV="refresh" CONTENT="0">
</head>
<body>
<center>
<h2>My Web Cam</h2>
<img src="webcam.jpg" width="480" height="360">
</center>
</body>
</html>
syn-ack
Feb 6 2009, 09:35 PM
Hi install your kernel headers then make again. drinks.gif
Saj5786
Feb 7 2009, 11:51 AM
Thank you syn-ack for your replay,

but it looks like its worse then that or simple but i cannot see it (noob power)... cause i have already done that
(I'm using Webmin also btw, not sure if that matter)

i installed linux-headers , build-essential and another thing i dont remember the name, something module probably.
i was using this guide.

i also did:

apt-get install gspca-source
apt-get install module-assistant
m-a update
m-a a-i gspca-source
modprobe gspca
ls -las /dev/video0

(dont know exactly what it does but i did it biggrin.gif )
it looks like everything is install
well for me it does xD (/im/noob) biggrin.gif

but everytime i do webcam /etc/webcam.conf
shows up like this:

CODE
> webcam /etc/webcam.conf
reading config file: /etc/webcam.conf
/etc/webcam.conf:9: syntax error
v4l2: open /dev/video0
: No such file or directory
v4l2: open /dev/video0
: No such file or directory
v4l: open /dev/video0
: No such file or directory
no grabber device available


-.- "no such file or directory"? mkdir /dev/video0 > cannot create file already exist || chmod 666 /var/video0 or chmod 777 /dev/video0 -.- i also did this... just in case :P

Grrr.gif

cray.gif


Ill keep trying and if im able to make it work ill write about it :S (lets hope i know what made it work :S with so much stuff sometimes its hard to know what did it xD LOL)

Thank You.
syn-ack
Feb 10 2009, 10:21 PM
looks like video0 is not being created as the module not loaded properly

do this

rmmod gspca
then
modprobe -v gspca
then
dmesg
and
ls -l /dev/video

also provide
uname -r


it's mknod not mkdir but is not needed here.
Saj5786
Feb 13 2009, 06:56 PM
Godamn i think im just to noob for this :( still have a lot to learn :)

but here is what i did:

CODE
> rmmod gspc
ERROR: Module gspc does not exist in /proc/modules

> modprobe -v gspca

> dmesg
Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-23etch1) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri Dec 12 16:48:28 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data)
BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
383MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 327664
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 98288 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000fa0a0
ACPI: RSDT (v001 AMIINT VIA_P6   0x00000010 MSFT 0x00000097) @ 0x4fff0000
ACPI: FADT (v001 AMIINT VIA_P6   0x00000011 MSFT 0x00000097) @ 0x4fff0030
ACPI: MADT (v001 AMIINT VIA_P6   0x00000009 MSFT 0x00000097) @ 0x4fff00c0
ACPI: DSDT (v001    VIA APOLLO-P 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
Detected 2798.800 MHz processor.
Built 1 zonelists.  Total pages: 327664
Kernel command line: root=/dev/hda1 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1290944k/1310656k available (1543k kernel code, 18488k reserved, 578k data, 196k init, 393152k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5604.83 BogoMIPS (lpj=11209665)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Total of 1 processors activated (5604.83 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4765k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:01.0
  IO window: a000-afff
  MEM window: dfe00000-dfefffff
  PREFETCH window: bfd00000-dfcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1234003553.848:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Bypassing VIA 8237 APIC De-Assert Message
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
SCSI subsystem initialized
libata version 2.00 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
hda: ST380011A, ATA DISK drive
hdb: ST3120023A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CD-R/RW SW-252S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
sata_via 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
sata_via 0000:00:0f.0: routed to hard irq line 10
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
scsi0 : sata_via
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xEC07
scsi1 : sata_via
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xE407
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 177, io base 0x0000cc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 1
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 1
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 1
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 177, io mem 0xdfffbe00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
eth0: VIA Rhine II at 0x1c000, 00:0b:6a:2c:73:b8, IRQ 185.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdb: max request size: 128KiB
hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA PT800 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input0
Floppy drive(s): fd0 is 1.44M
Linux video capture interface: v2.00
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
/usr/src/modules/gspca/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
/usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:3887] Camera type JPEG
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:11
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:11.5 to 64
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R(c)
/usr/src/modules/gspca/gspca_core.c: [spca5xx_getcapability:1165] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new driver gspca
/usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.04 registered
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.05
usbcore: registered new driver zc0301
Adding 2650684k swap on /dev/hda5.  Priority:-1 extents:1 across:2650684k
EXT3 FS on hda1, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 224 bytes per conntrack
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[drm] Initialized radeon 1.25.0 20060524 on minor 0
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x8000000
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x8000000
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x8000000
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs

> ls -l /dev/video
ls: /dev/video: Arquivo ou diretório não encontrado (File not found)

> mkdir /dev/video

> ls -l /dev/video
total 0

> webcam /etc/webcam.conf
reading config file: /etc/webcam.conf
/etc/webcam.conf:9: syntax error
v4l2: open /dev/video
: No such file or directory
v4l2: open /dev/video
: No such file or directory
v4l: open /dev/video
: No such file or directory
no grabber device available

> uname -r
2.6.18-6-686


thank you for your patience and help biggrin.gif
syn-ack
Feb 14 2009, 01:22 AM
np saj

It should be

CODE
ls -l /dev/video0


not

CODE
ls -l /dev/video



the module is loading correctly


CODE
/usr/src/modules/gspca/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
/usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:3887] Camera type JPEG
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:11
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:11.5 to 64
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R©
/usr/src/modules/gspca/gspca_core.c: [spca5xx_getcapability:1165] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new driver gspca
/usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.04 registered
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.05
Saj5786
Feb 17 2009, 07:36 PM
yeah, i was also thinking that... but everytime i do the:

> webcam /etc/webcam.conf

still shows up the:

CODE
> webcam /etc/webcam.conf
reading config file: /etc/webcam.conf
/etc/webcam.conf:9: syntax error
v4l2: open /dev/video0
: No such file or directory
v4l2: open /dev/video0
: No such file or directory
v4l: open /dev/video0
: No such file or directory
no grabber device available



do u think that maybe the webcam.conf is incorrect? i did it from here

> webcam.conf
[ftp]
host = localhost
user = nobody
pass = xxxxxx
dir = /var/www
file = webcam.jpg
tmp = imageup.jpg
local = 1

[grab]
device = /dev/video0
width = 320
height = 240
delay = 0
input = camera
norm = ntsc
quality = 75
trigger = 180


dont realy know... :S wierd on Ubuntu worked fine on Debian... its giving this problem :/


syn-ack
Feb 28 2009, 11:16 AM
Have you tested the cam first with xawtv as per the "Testing and Troubleshooting" section of the instructions?
Saj5786
Mar 13 2009, 11:39 AM
hmm....

when i do:

CODE
> xawtv -noscale -noxv -c “/dev/video0″
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.18-6-686)
Error: Can't open display:


:S ill try to find the "Testing and Troubleshooting" :P
syn-ack
Apr 10 2009, 08:50 PM
Hi Saj,

did you sort the problem out?
Saj5786
Jul 25 2009, 11:59 AM
naa... havent had time actualy to try again... but its still not working...
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2012 Invision Power Services, Inc.